: Always use the "Test" button on the cutter or the "Area Test" in your software to ensure the carriage moves correctly before wasting material. Vinyl U.S. Cutter set up MH 721-MK2 28"
If you are using the USB connection, you must install the proper drivers to create a virtual COM port.
or depending on the model version) from the manufacturer or reseller site like ukoter.co.uk. 721-.rar
recommend using a serial connection or a high-quality adapter like the for better reliability. 2. Driver Installation
: Place your vinyl under the pinch rollers and lock them down. : Always use the "Test" button on the
Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible.
: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point. or depending on the model version) from the
: Connect the power cord. While the cutter has a USB port, it uses a "USB-to-serial" chip that can be unstable. Many experts on the USCutter Forum