Mastercam 2017 For Solidworks Tutorial (lathe) May 2026

In the parameters, ensure you have a "Lead In" and "Lead Out" so the tool doesn't just plunge straight down into the material. 4. Roughing and Finishing This is where the shape happens.

In this tutorial, we’re going to walk through the essential workflow for programming a basic turned part in Mastercam 2017. 1. Preparing the Workspace Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

This is critical. You need to tell Mastercam the size of the raw bar stock. Use the "Make from 2 points" or "Cylinder" options. Don't forget to add a little extra on the face for a facing cut and enough "meat" in the back for the chuck jaws to grab! 3. The Facing Operation Always start by cleaning up the face of the part. Select Lathe Face . In the parameters, ensure you have a "Lead

You can’t cut air (well, you can, but it’s not productive). In this tutorial, we’re going to walk through