Pts-6 | V2.0

: Must be mounted above the finished floor level. Prime-Time Electronic Trap Priming Assembly Surface Mount

: Features a manual override switch or test button for on-demand priming and system verification. PTS-6 V2.0

: While factory-preset, it features an adjustable 24-hour timer to customize the priming schedule. Installation Requirements To ensure proper function, the must be installed by a contractor who provides: Potable Water Supply : Connected to the 3/4" inlet. Power : 120V or 220V electrical line. : Must be mounted above the finished floor level

: The entire assembly is pre-assembled in a NEMA Type 1 steel cabinet , suitable for either surface or flush wall mounting. Technical Specifications Capacity Serves up to 6 floor drains Electrical 120V or 220V solenoid valve options; 3-wire connection Connections 3/4" FNPT inlet connection Outlet Fittings Technical Specifications Capacity Serves up to 6 floor

: It is factory-preset to activate for 6 seconds once every 24 hours .

: Supplies a minimum of 2 oz of potable water at 20 PSIG to each connected drain.