: Place the bottom half of the VHS shell on a flat surface. Insert the two spools (reels) into their designated circular slots.
: Ensure the spring-loaded brake lever (the piece that stops the reels from spinning freely) is pushed back so the spools can sit flat. vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici...
: Use a flat-head screwdriver or your finger to manually turn one of the spools from the bottom to ensure the tape moves smoothly across the path without snagging. : Place the bottom half of the VHS shell on a flat surface
Are you putting this together for a or a custom spool swap ? : Use a flat-head screwdriver or your finger
: Make sure the front spring for the flip-up door is tensioned correctly so the door snaps shut.
: Align the top half of the shell with the bottom. It should click into place without resistance. If there is a gap, the tape or a plastic lever is likely misaligned.
: Flip the cassette over and replace the five standard Phillips-head screws.